Additional Phone Features; Call Forwarding - Yealink T57W User Manual

Important Note About 911:
Because VoIP (Voice over Internet Protocol) service
works differently than traditional phone service, VoIP
E911 service may also work differently. To understand
limitations and to be prepared should you need to make
a 911 call from your IP phone, please read the TelNet
E911 Emergency Service Advisory Notification at:
www.telnetww.com/TelNet911Advisory.pdf
VoIP 911 Alert
Emergency 911 service on this device may be limited or
unavailable and DOES NOT function during a power or
broadband outage.
Click to visit www.telnetww.com/911info

Additional Phone Features

Muting the Microphone
• During a call, press
• To disable Mute, press
Change Volume
• To change call volume, press
• To change the ringer volume, press
phone is idle or ringing
Change Ringtone
Change the Incoming Call Ringtone
1. Press Menu softkey
2. Navigate to Basic
3. Navigate to Sound
4. Select Ring Tones
5. Select Common
6. Highlighted ringtone will automatically play
7. Navigate up/down to select the desired ringtone
8. Press Save
Access Voice Messages
1. Press the voicemail button
desired voicemail box. If there is a new message
waiting, simply press Connect.
2. Follow prompts to play messages, record greetings, etc.
TelNet Worldwide, Inc. • telnetww.com • (800) 508-1254
Yealink T57W
User Guide
to mute your audio
again
during a call
when the
and then press the
(See Voice Messaging section for more options)
Quick Dial Calling
Features

Call Forwarding

Forward all incoming calls to another number or voicemail,
forward calls only when your line is busy, or when calls go
unanswered. As part of your business continuity plan, have
Call Forwarding Not Reachable feature set to automatically
forward all calls if something prevents calls from completing,
(e.g. power failure or loss of Internet connectivity).
Activate Call Forwarding
1. Lift handset. Press the
2. Enter phone number to which calls will be forwarded, or
forward to Voicemail
3. Press # and replace handset to activate service
Deactivate Call Forwarding
1. Lift handset. Press the
2. Replace handset to deactivate service
NOTE:
• Call forwarding options marked with
waiting to be disabled to function properly.
*
code (noted below)
*
or # code (below)
*
require call
yealink-t57w-reference-guide Page 6