ICP DAS USA I-87004W User Manual page 22

If the sensor at location B is broken and to be replaced by a new
sensor, then do the followings.
1. Select Assigned_Sensor_1_460008025AC79710.
2. Select Remove.
3. Disconnect the broken sensor from the port.
4. Connect the new sensor to the port.
5. Select "Update new sensor" and you will see the new sensor as
undefined sensor.
I-87004W User Manual, v 1.0.1, Aug 2017 E-mail: service@icpdas.com
22
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.