Installing The Driver With Windows; Creating A Driver Floppy Disk; Installing The Os And Driver - Adaptec ASA-7211C/F Installation Manual

ASA-7211C/F Installation Guide

Installing the Driver with Windows

To install the driver during a fresh install of the operating system,
you need to perform the following procedures:

Creating a Driver Floppy Disk

I

Installing the OS and Driver

I
Creating a Driver Floppy Disk
Note: To create a driver floppy disk, you need a separate
computer with a functioning Windows operating system.
To create the driver disk:
1 Insert a formatted, blank floppy disk.
Browse to the appropriate directory for the operating system
2
you intend to install, one of the following:
I
\Windows\Win2003\disk
I \Windows\Win2000\disk
I \Windows\WinNT40\disk
3 Click the self-extracting
the floppy disk.
Installing the OS and Driver
1 Insert the Windows setup CD and restart the system to begin
the Windows installation.
When prompted to install a third-party driver, press F6.
2
3 Insert the driver floppy disk you created in
Floppy Disk
to specify that the driver is on the installation floppy disk, and
then press Enter. The computer reads the disk.
The Adaptec driver for your operating system, one of the
following, is listed:
I
Adaptec Windows Server 2003 1Gb iSCSI Miniport Driver
I
Adaptec Windows 2000 1Gb iSCSI Miniport Driver
I
Adaptec Windows NT 4.0 1Gb iSCSI Miniport Driver
4 Press Enter.
4-4
Winxxxx.exe
and wait until prompted to install a driver. Press S
file and extract the files to
Creating a Driver