If You Turned Power Off During Valve Replacement - Gilson VALVEMATE User Manual

Installation
If You Turned Power OFF During
Valve Replacement
If you turned power OFF during valve installation,
the coupling inside of the VALVEMATE may rotate
when you install the valve. This may make it
difficult to locate and tighten the coupling screws,
accessed via the holes on the right side of the
VALVEMATE. If this occurs:
1 Remove the valve, if it is installed.
2 ENSURE THAT ALL TOOLS HAVE BEEN
REMOVED FROM THE VALVEMATE.
3 Turn power on to the VALVEMATE. The
coupling will move to its home position.
4 Install the valve again as described on pages
through 2-14.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2-12
2
2-23