Attaching The Valve Adapter - Gilson VALVEMATE User Manual

Installation

Attaching the Valve Adapter

If a valve adapter is not attached to the valve, refer
to the appropriate instructions.
Hamilton 86905, 86913, 86915, or 86918 valve. To
attach the valve adapter:
1 If necessary, remove the selector knob by
removing the screw that secures the knob to the
valve.
2 Using the following diagram as a reference,
install the valve adapter. When joining the
adapter to the valve, ensure that:
• the valve adapter's groove faces upward
• the valve's flat edge faces the left and is
perpendicular to the valve adapter's groove
• the one or more dots located above the valve
adapter's flat edge face away from the
valve. The adapter for the Hamilton 86905
valve has two dots while the adapter for the
Hamilton 86913, 86915, or 86918 valve has
one dot.
3 Tighten the lockring with the supplied lockring
wrench.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2
2-15