Table of Contents
Advertisement
Installation
2-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Rheodyne 5041, 5042, 7000, 7010, 7040, 7610,
7710, 9010, or 9710 valve. To verify that the valve
is properly installed:
1
If the valve has a loop, remove the loop.
2
Fill a syringe.
3
Connect the syringe to port 2 and dispense
liquid into the port.
4
Verify that the liquid exits port 3. If it does not,
remove the valve, orient the valve in its home
position, and install the valve again. (Refer to
pages
2-13
and 2-14.) Then repeat steps 1–4.
5
Press the up arrow key.
6
Dispense additional liquid into port 2.
7
Verify that the liquid exits port 1.
2
Advertisement
Table of Contents
