Table of Contents
Advertisement
Installation
Fuse Installation
You receive the VALVEMATE without any fuses
installed.
1
Locate the accessory package containing the
fuse drawer appropriate for your line voltage.
Discard the other fuse drawer.
2
Locate the accessory package containing the 2.0
amp fuses.
3
Install the fuse(s) into the fuse drawer. The fuse
drawer for 100/120V accepts one fuse. The fuse
drawer for 220/240V accepts two fuses.
4
Insert the fuse drawer into its receptacle in the
VALVEMATE. See rear panel diagram on page
2-2.
Fuse drawer for 100/120 voltage selection
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Fuse drawer for 220/240 voltage selection
2
2-3
Advertisement
Table of Contents
