Troubleshooting - Stiga CS 48 Li 14 Operator's Manual

9. TROUBLESHOOTING

PROBLEM
Bar end chain running hot and
smoking
Motor runs, but chain
is not rotating.
Subject to technical modifications.
POSSIBLE CAUSE
Check chain tension for
overtightened conditions
Bar lube reservoir empty
Chain tension too tight. Check
guide bar and chain assembly.
Check guide bar and chain for
damage.
10
REMEDY
Tension chain. Refer to Chain
Tension earlier in this manual.
Check bar lube reservoir.
Retention chain. Refer to Chain
Tension earlier in this manual.
Refer to Replacing the Bar and
Chain earlier in this manual.
Inspect guide bar and chain.