Troubleshooting; Accessories - Stiga SEV 2416 Q Operator's Manual

14
EN

9. TROUBLESHOOTING

IMPORTANT
mation in this Manual provides good machine no-
tions and the guide allows you to identify and face
the most common operating situations. For any
other difficulty or problem, please contact an Au-
thorised Service Centre.
• The machine does not start:
– make sure there is current in the socket;
– check that the power cable and extension lead
are intact;
– check that the switch works correctly; if this is
not the case, contact your Dealer for a replace-
ment;
• Poor performance
– check the direction in which the chain is
mount ed,

10. ACCESSORIES

The table contains a list of all possible combina-
tions between bar and chain, indicating those
which may be used on each machine, marked with
the symbol " ".
WARNING!
selection, application and usage of bar and
Bar and chain combinations
Pitch
Inches Inches / cm
3/8" 16" / 40 cm
Carefully reading the infor-
In consideration that the
Length
Inches / mm
0,050" / 1,3 mm
TROUBLESHOOTING / ACCESSORIES
– check that the chain is correctly sharpened and/
or for any worn or damaged parts (contact your
Dealer concerning the most suitable interven-
tion).
• The chain does not turn:
– make sure that the front guard is positioned fac-
ing backwards.
• The oil does not flow:
– make sure there is oil in the tank and flush it if
necessary (
• Sparks form:
– contact your Dealer for an inspection of the mo-
tor and brushes.
chain are actions made solely by the user, the
latter assumes responsibility for damages of
any kind due to such actions. When in doubt
or if lacking knowledge of the specificity of
each bar or chain, contact your retailer or spe-
cialised gardening centre.
BAR
Groove
width
160SDEA041
8.7).
Code
OREGON
CHAIN
Code
OREGON
91P057X