Get Started; Find The Device On The Network; Access The Device - Axis I8016-LVE User Manual

AXIS I8016-LVE Network Video Intercom

Get started

Get started

Find the device on the network

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both
applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.
Browser support
You can use the device with the following browsers:
®
Windows
®
macOS
Other operating systems
If you need more information about recommended browsers, go to axis.com/browser-support.

Access the device

1. Open a browser and enter the IP address or host name of the Axis device.
If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.
2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a
new password for the root account on page 5 .
Verify that no one has tampered with the firmware
To make sure that the device has its original Axis firmware, or to take full control of the device after a security attack:
1. Reset to factory default settings. See Reset to factory default settings on page 15.
After the reset, secure boot guarantees the state of the device.
2. Configure and install the device.
Set a new password for the root account
Important
The default administrator username is root. If the password for root is lost, reset the device to factory default settings.
TM
Chrome Firefox
x
recommended
recommended
x x
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/62432
Support tip: Password security confirmation check
® ®
Edge
x
5
®
Safari
x