Table of Contents
Advertisement
ATCA-9100 MRM Installation Guide
7. Configure the sRIO interfaces on the DSP devices:
sriotool idin 20
The value 20 represents all DSP devices.
8. Configure the DDR memory for the DSP devices:
sriotool idcm 20
9. Load the image for running diagnostic tests to the DSP devices:
For F‐DSP farms:
sriotool idpl 20 /usr/share/fdspdiags.srec
For T‐DSP farms:
sriotool idpl 20 /usr/share/tidspdiags.srec
When the diagnostics image is loaded, the DSP LEDs become green and this message
displays:
DSP Program Load/Execute Success
10. Exit the Linux shell and log off the MRM:
exit
exit
Where to go from here
See the ATCA‐9100 Media Resource Module Reference for detailed information on the module's
electrical and mechanical characteristics as well as the software specifically for controlling the
DSPs. To configure other aspects of the MRM, see the Software Guide for Management
Processors and General Purpose Computing Processors (also called the Software Guide) and the
CLI Reference.
You should also set passwords for the
those who do not require administrative privileges. See the Software Guide for more
information.
Where to get more product information
Please visit the RadiSys Web site at www.radisys.com for product information and
other resources. Downloads (manuals, release notes, software, etc.) are available at
www.radisys.com/downloads.
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
and the
users and create user accounts for
root
admin
Advertisement
Table of Contents
