SYSTEM 3000 OPERATIONS AND MAINTENANCE MANUAL
Carefully pull up on the battery to remove.
Install the new battery. When you turn the TPU on you will have to set up the boot
parameters. Please refer to the boot up configuration section on page 27 and on
page 31.
4.38
SUGGESTED TOOLS FOR 3000 SERVICE.
•
Fluke 87 multimeter
•
Tektronix TDS 3014, 4-channel or a THS720A 2-channel digital
oscilloscope
•
Hewlett Packard 4194 A, impedance / gain-phase analyzer with
measurement unit
•
Terminal program such as "Hyperterminal for Windows"
•
Small flat blade screwdriver for adjustments
•
Medium philips-head screwdriver for #4, 6, and 8 screws
•
6mm hex wrench
•
¾ -inch wrench
•
Flat blade screwdriver about 5 inches long for #4 screws
•
Wire cutters
•
9/16-inch wrench
•
9-pin to 9-pin Null modem cable
4-72
TROUBLESHOOTING GUIDE
L-3 Klein Associates, Inc.