Configuring The Klein 3000 Tpu - Klein 3000 Series Troubleshooting Manual

SYSTEM 3000 OPERATIONS AND MAINTENANCE MANUAL
Double check the klein directory on the hard drive and make
sure the vxWorks file is located in it.
The LAN configuration for the Host PC should now be set
up.
4.9

CONFIGURING THE KLEIN 3000 TPU.

Connect a Terminal or PC running Hyper Terminal to COM port 1 on the back of the
TPU.
Configure the device to:
• 9600 baud
• 8 bit
• 1 stop bit
• none flow control
• tty emulation
ASCII Setup is as shown in dialog box.
Connect the TPU to the host PC computer using the Ethenet hub.
Turn on the TPU. The CPU in the TPU will look for the host computer and load the file
vxWorks.
VxWorks System Boot
Copyright 1984-2001 Wind River Systems, Inc.
CPU: Motorola MVME5110-2161 - MPC 7410
Version: VxWorks5.4.2
L-3 Klein Associates, Inc. TROUBLESHOOTING GUIDE 4-27