Lcd Panel Support; Lcd Connector; Extended Lcd Connector - Epson S5U13A05P00C100 User Manual

6.5 LCD Panel Support

6.5.1 LCD Connector

6.5.2 Extended LCD Connector

S5U13A05P00C100 Evaluation Board
Rev. 1.02
The S1D13A05 directly supports:
• Single-panel, single drive passive displays.
• 4/8-bit monochrome interface.
• 4/8/16-bit color interface.
• Active Matrix TFT interface.
• 9/12/18-bit interface.
• Direct support for 18-bit Sharp HR-TFT LCD panel.
• Direct support for 18-bit Casio TFT LCD panel.
• Direct support for 18-bit TFT Type 2 LCD panel.
• Direct support for 18-bit TFT Type 3 LCD panel.
• Direct support for 18-bit TFT Type 4 (Epson ND-TFD) LCD panel.
All the necessary signals are provided on the 40-pin LCD Connector H1, 16-pin Extended
LCD Connector H2, and the 26-pin TFT Type 3 Extended LCD Connector H3. For detailed
connection information, see Section 5, "LCD Interface Pin Mapping" on page 14.
S5U13A05P00C100 does not provide a power supply for the LCD bias voltage needed by
Passive LCD panels. An external power supply is required to provide the bias LCD voltage
to the LCD panel.
The LCD Connector H1 provides all LCD panel signals required for Active Matrix TFT.
For Passive LCD panels, all the signals are provided except the LCD bias voltage (an
external power supply for the LCD bias voltage is required for Passive LCD panels). These
signals are buffered to either a 3.3V level or a 5.0V level depending on the setting of JP3.
See Table 3-2: "Jumper Summary" on page 9.
The S1D13A05 directly supports several extended panel types such as the Sharp 18-bit HR-
TFT, Casio TFT and compatible panels. The Extended LCD Connector H2 provides the
extra signals required to support these panels. The signals on this connector are provided
directly from the S1D13A05 without any buffering and are 3.3V signals.
Seiko Epson Corporation
Technical Description
17