Table of Contents
Advertisement
Available languages
Available languages
Holdall
There are also a bag with two poles that can be used to wind a supply hose
that is up to 60 m long. Wind the hose in the figure 8 around the poles in the
bag.
Leakage test
If the unit fails the leakage test it must be repaired before use.
Preparation
1.
Prepare two gas cylinders filled to the same pressure, above 200 bar.
2.
Connect the supply hose to the surface unit.
3.
Connect the adapter hoses to the cylinders.
Test
A
24
DP1
B
Advertisement
Table of Contents
