Call Resident - HIKVISION DS-KH6320-LE1 Operation Manual

3. Enter the contact name and phone No.
Note
The phone No. is the number you created when registering SIP account.
4. Tap OK to save the settings.
Note
Up to 200 contacts can be added.

3.1.2 Call Resident

Steps
1. Tap Call →
to enter the residents calling page.
2. Enter the calling number.
Note
• When you adopt private SIP protocol, the calling number format should be x-
x-x-xxx. For example, the calling number of Community 1, Building 2, Unit 3,
and Room 405 is 1-2-3-405.
• The community No. can be omitted.
3. Tap the call button to start an audiovisual call.
Network Indoor Station Operation Guide
Figure 3-3 Call Resident
5