Video Intercom 9 Series Indoor Station Operation Guide
Note
If you enable the VoIP account functions, you should enter the contact name and
the phone number of VOIP account for the standard SIP protocol.
4. Tap OK to save the settings.
Note
Up to 200 contacts can be added.
4.1.3 Call Resident
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Steps
1. On the main page of the device, tap Call to enter the residents calling page.
2. Enter the calling number to call.
- If you want to call room, the calling number format should be x-x-x-xxx. For
example, the calling number of Community 1, Building 2, Unit 3, and Room 405
is 1-2-3-405. Tap the call button to start an audiovisual call.
Note
The community No. can be omitted.
- If you want to call VoIP contact, the calling number should be the phone
number of VoIP account.
Figure 4-4 Call Resident
9