Before You Start
•
Tap Settings →
•
You should create an arm/disarm password. Please refers to Password Settings
for the details.
Steps
1. Tap
to enter the scene page.
2. Select Stay Mode, Away Mode, Sleeping Mode or Custom.
3. Enter the arm/disarm password to enable the scene.
4. Tap OK.
3.3.2 Disarm Your Room
Steps
1. Tap
to disarm.
2. Enter the arm/disarm password.
3. Tap OK.
3.4 Arming Mode Settings
4 arming modes can be configured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Tap Settings →
Steps
Note
Arming status page and zone settings page are hidden by default. You should enable
alarm function first.
1. Tap Settings →
2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor Station Operation Guide
→ Preference → Alarm to enable the Alarm function.
→ Preference to enable Alarm function.
→ Alarm Settings to enter the arming mode settings page.
9