Table of Contents
Advertisement
4.1.2 Call Resident
Steps
Note
Only when the Call Management Center function is enabled, should the call center button be
displayed. For details, see the configuration guide.
1. Tap Call →
to enter the residents calling page.
2. Enter the calling number.
The calling number format should be x-x-x-xxx. For example, the calling number of Community 1,
Building 2, Unit 3, and Room 405 is 1-2-3-405.
Note
The community No. can be omitted.
3. Tap the call button to start an audiovisual call.
4. Optional: Tap
4.1.3 Call Indoor Extension/Indoor Station
Tap Call on the main page to enter the calling page.
If you install indoor station and indoor extensions at home, you can call the indoor extension via
your indoor station, and vice versa.
Network Indoor Station User Manual
Figure 4-2 Call Resident
to call management center.
35
Advertisement
Table of Contents
