Table of Contents
Advertisement
PANEL1150-370 15.1" All-in-One PANEL PC User's Manual
This chapter describes the installation and the cable connection to the
system connectors. See system board User's Manual that came with
your PANEL PC packaging for more details. Sections in this chapter
includes
CPU
DRAM
HDD
3 x Serial
Ports
Parallel Port
The PANEL PC 1150 has a Pentium III little board with a free ISA and
PCI slots inside the riser card assembly. It already builds in a Pentium
III CPU, relevant DRAM and a 3.5" HDD (or a 2.5" optional HDD).
These are all standard and the system is ready to play. System
performance can be increased by upgrading to a higher performance
CPU, higher capacity DRAM modules and hard disk drive. The user
can use the I/O ports located at the backside of the chassis to connect
external peripheral devices, such as a monitor, serial devices, parallel
printer...etc.
NOTE:
Make sure the power cord is disconnected before any
installation. To install any internal device such as CPU,
DRAM and HDD, take out the rear chassis cover first.
System Installation
C h a p t e r
System Installation
VGA
Ethernet
Digital I/O
Keyboard
PS/2 Mouse
3
Expansion
Slot
System O/S
and
Software
Installation
11
Advertisement
Table of Contents
