PANEL1150-370 15.1" All-in-One PANEL PC User's Manual
3.5
VGA
The PANEL PC 1150 has an analog RGB interface connector. It is
able to connect to an expansion CRT monitor, and the system can
display on both the flat panel and the CRT simultaneously.
3.6
Ethernet
The PANEL PC 1150 provides an NE2000 compatible Ethernet (RJ-45)
interface. For network connection, just plug in one cable end of the
PANEL PC 1150 100-Base-T Hub into the standard Ethernet phone
jack. The pin assignment of the RJ-45 is listed below;
1 2 3 4 5 6 7 8
RJ-45
16
RJ-45 Connector Pin Assignment
Pin
Description
1
Tx+ (Data transmission positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
6
Rx- (Data reception negative)
others
Not use
System Installation