Advertisement
Table of Contents
Item No.：SPR-211Mx
Installation guide
Specification
MAX
0-8 K G
Spare part
NO.
A
TOOLS
Table size:
>600mm
Please do not exceed the maximum
WARNING bearing weight.
WARNING
Loading range
0~8kg
Height adjustment range
40-400mm
Accessory
x1
STEP 2
>450mm
Please press the switch to adjust it to a
desired height according to your situation.
When lifting the workstation, press the switch by your thumb and up the table with holding both
sides of table edges, then it will get next height ,locked asthmatically when you hearing the voice.
When lowering the workstation, press the switch by your thumb and the loading will let it lower
from current height, locked it automatically when hearing the voice.
when the
Please do not put hands near the supporting
bars, to avoid any hurt while the desk is lifting up
and down.
WARNING
Advertisement
Table of Contents
Related Manuals for Spacetronik SPR-211M Series
Summary of Contents for Spacetronik SPR-211M Series
- Page 1 Item No.：SPR-211Mx Installation guide when the Table size: Specification STEP 2 >450mm Please do not put hands near the supporting bars, to avoid any hurt while the desk is lifting up and down. WARNING 0-8 K G >600mm Please press the switch to adjust it to a desired height according to your situation.
- Page 2 STEP 3 Please make sure all installed equipments Please make sure all installed are on the table, and not sticking out of equipments are on the table, and the edge, or it may harm or cause damage. not exceed the edge, or it may Attention Please put the devices onto the top of the hurt you or cause damage.
Need help?
Do you have a question about the SPR-211M Series and is the answer not in the manual?
Questions and answers