Seco SBC-C90 User Manual page 60

4.6 Boot menu
Menu Item
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot
SATA Support
NVMe Support
VGA Support
USB Support
PS2 Devices Support
Network Stack Driver Support
Redirection Support
Boot Mode Select
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8
SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
Options Description
0 .. 65535 Number of seconds to wait for setup activation key. 655535 means indefinite waiting.
On / Off Select the Keyboard NumLock State at boot
Enabled / Disabled Enables or Disables Quiet Boot options
Enables or disables boot with initialization of a minimal set of devices required to launch active boot option.
Enabled / Disabled
Has no effect for BBS boot options.
If Last Boot SATA Devices Only, Only last boot SATA device will be available in Post.
Last Boot SATA Devices
Only / All SATA Devices
If All SATA Devices, all SATA devices will be available in OS and Post
Enabled / Disabled If Disabled, NVMe device will be skipped
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post. Efi driver
Auto / EFI Driver
will still be installed with EFI OS
If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass Storage and
Disabled
specific USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be available
Full Initial
in OS and Post.
Partial Initial
Enabled / Disabled If Disabled, PS2 devices will be skipped.
Enabled / Disabled If Disabled, NetWork Stack Driver will be skipped
Enabled / Disabled If disable, Redirection function will be disabled
LEGACY
Select the boot mode between Legacy and UEFI
UEFI
SATA 1 HD
SATA 0 HD
NVME
CD/DVD
SD/eMMC Select the system boot order
USB Device
Network
Other Device
Disabled
60