Seco SBC-C90 User Manual page 57

4.3.22 AMD Platform submenu
Menu Item
AMD Firmware Version
Primary Video Adaptor
4.3.23 RAM Disk Configuration submenu
Menu Item
Disk Memory Type
Create raw
Size (Hex)
Create & Exit
Discard & Exit
Create from file
Remove selected RAM disk(s)
SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
Options Description
Opens an information page with all details about the Firmware
Int. Graphics (IGD) Allows to select if Internal Graphics controller (IGD) or external PCI-e Graphic Controller x8 (PEG) should be
Ext. Graphics (PEG) used as a Primary display
Options Description
Boot Service Data
Specifies type of memory to use from available memory pool in system to create a disk.
Reserved
Create a raw RAM disk
If Create raw is selected, this option will be enabled. The valid RAM disk size should be multiples of the
RAM disk block size.
If Create raw is selected, this option will be enabled. Create a new RAM disk with the given starting and
ending address
Discard and exit
Create a RAM disk from a given file.
Remove selected RAM disk(s)
57