Seco SBC-C90 User Manual page 45

Erase fTPM NV for factory reset
4.3.4 ACPI Settings submenu
Menu Item
Enable ACPI Auto Configuration
Enable Hibernation
ACPI Sleep State
Lock Legacy resources
4.3.5 SATA Settings submenu
Menu Item
Standard (CN32) SATA #0
Standard (CN14) SATA #1
4.3.6 DXIO Settings submenu
Menu Item
DDI Port
PEG Port
PCI-E Port
4.3.6.1 DDI Port submenu
Menu Item
DP0 (CN10A) State
DP1 (CN10B) State
DP2 (CN11A) State
DP3 (CN11B) State
SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
Disabled / Enabled
continue system boot, fTPM will NOT be enabled with new CPU unless fTPM is reset (reinitialized).
Options Description
Enables or Disables BIOS ACPI Auto Configuration. The following menu items will appear only when this
Disabled / Enabled
menu item is Disabled
Enables or disables system ability to Hybernate (OS/S4 Sleep State). This option may be not effective with
Disabled / Enabled
some OS.
Suspend Disabled
Select the highest ACPI Sleep state the system will enter when the SUSPEND button is pressed.
S3 (Suspend to RAM)
Disabled / Enabled Enables or Disables Lock of Legacy resources
Options Description
Shows information related to eventual devices connected to SATA ports 0 or 1.
Options Description
See submenu Allows enabling and configuring the single DDI ports
See submenu Allows enabling and configuring the PEG port(s)
See submenu Allows enabling and configuring the PCI-e ports
Options Description
Disabled
Enable or Disable DDI ports 0, 1, 2 and 3.
Enabled
-enabled
ord and
45