Seco SBC-C90 User Manual page 51

3.5" sbc with amd ryzen embedded r1000/v1000 family of socs
Table of Contents

Advertisement

-
RAM Temperature
-
APU_VDDCPU_RUN
-
APU_VDDNB_RUN
-
MEM_VDDIO_SUS
-
VDDP_ALW
-
MEM_VPP_SUS
-
1.8V_ALW
-
MEM_VTT_RUN
-
VDDP_RUN
4.3.17.2 Reset Causes Handling submenu
Menu Item
Reset Button Pressed
Clear from log
WDT Timeout Expired
Clear from log
Power Failure
Clear from log
E.C. soft reset
Clear from log
4.3.17.3 Super IO Configuration submenu
Menu Item
Serial Port 1
Address
SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
Options
Description
Happened / Not
If Reset button is pressed, this parameter will automatically be set as Happened
happened
Enabled / Disabled
If Reset button is pressed and Clear from log parameter is enabled, this will require system reset
Happened / Not
If Watchdog Timer (WDT) timeout has expired, this parameter will automatically be set as Happened
happened
If Watchdog Timer (WDT) timeout has expired, and Clear from log parameter is enabled, this will require
Enabled / Disabled
system reset
Happened / Not
If a Power Failure occurs, this parameter will automatically be set as Happened
happened
Enabled / Disabled
If a Power Failure occurs and Clear from log parameter is enabled, this will require system reset
Happened / Not
If the Embedded Controller (E.C.) is reset, this parameter will automatically be set as Happened
happened
If the Embedded Controller (E.C.) is reset and Clear from log parameter is enabled, this will require system
Enabled / Disabled
reset
Options
Description
Enabled/Disabled
Enables or Disables Serial Port # 1
0X3F8, 0x3E8, 0x2F8,
Select the Base address for Serial Port #1, if enabled.
0x2F0, 0x2E8, 0x2E0,
51

Advertisement

Table of Contents
loading

Table of Contents