Seco SBC-C90 User Manual page 43

4.3 Advanced menu
Menu Item
Battery Failure Manager
Trusted Computing
TPM selection
ACPI Settings
SATA presence
DXIO Settings
S5 RTC Wake Settings
CPU Configuration
AMI Graphic Output Protocol Policy
PCI Subsystem Settings
USB Configuration
CSM Configuration
NVMe Configuration
SDIO Configuration
Main Thermal Configuration
SMBIOS Information
Embedded Controller
HSUART Transceiver Configuration
M.2 peripheral management
Network Stack Configuration
AMD CBS
AMD Platform
RAM Disk Configuration
SBC-C90
SBC-C90 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
Options Description
See submenu Sets the action to be performed in case of battery failure
See submenu Trusted Computing Settings
See submenu TPM selection
See submenu System ACPI parameters
See submenu SATA devices Configuration
See submenu PEG, PCIE and DDI Lanes configuration
See submenu Enable System to wake from S5 using RTC alarm
See submenu CPU Configuration Parameters
See submenu User Selected Monitor Output by Graphic Output protocol
See submenu PCI Subsystem Settings
See submenu USB Configuration Parameters
See submenu Compatibility Support Module (CSM) Configuration: Enable/Disable, Option ROM execution Settings, etc...
See submenu NVMe Device Options Settings
See submenu SDIO Configuration Parameters
See submenu Main thermal Configuration
See submenu SMBIOS Information
See submenu Embedded Controller Parameters
See submenu HSUART Transceiver Configuration Utility
See submenu M.2 peripheral management
See submenu Network Stack Settings
See submenu AMD CBS Setup Page
See submenu AMD Platform Setup Page
See submenu Settings for add/remove RAM disks
43