Raven SCS 660 Installation And Service Manual page 26

DISPLAY
RATE DATA
UniT FT
dLoG oFF
1) Definition of Data Menu Key:
Depressing this key displays selected Data Menu features in RATE display.
EXAMPLE: RATE display will display options by name and DATA will display
default setting.
Depressing this key after selecting DATA MENU toggles up through desired
features.
EXAMPLE: "Prn" "bEGn, "ALrn""on", "diSP""on", etc....
Depressing this key after selecting DATA MENU toggles down through desired
features.
EXAMPLE: "Prn" "bEGn, "DLoG""oFF", "UniT""FT", etc....
2) CONSOLE DATA PRINTOUT
A) RATE display will show "Prn". DATA display will show "bEGn" (Print Field
Begin).
1) To Print Field Begin, depress key labelled
B) RATE display will now show "Prn" and DATA display will show "End" (Print
Field End).
1) To Print Field End, depress key labelled
2) While "End" is displayed, if Field Begin is required, depress key
labelled
C) Momentarily depress
3) AUDIBLE ALARM ON/OFF
A) RATE display will show "ALrn".
B) Depressing
"off".
"off" means the audible alarms are disabled.
C) Momentarily depress
FEATURE and DESCRIPTION
DATA LOGGER TRIGGER UNITS
Used in data logging mode.
between feet [meters] or seconds (Serial interface console
only).
DATA LOGGER ON/OFF
Turns data logger ON or OFF (Serial interface console only).
to toggle DATA display to "BEGn".
momentarily changes the DATA display between "on" and
A value of "on" means the audible alarms are enabled; a value of
The trigger unit is selectable
to advance to AUDIBLE ALARM ON/OFF.
DATA display will show "on".
to advance to DISPLAY SMOOTHING ON/OFF.
24