BeaconMedaes HTM Instruction Book page 48

Icons
Name
Stopped / Running
Machine control
mode
EFL triggered
Running hours
Service
Purge saving
activated
Menu structure
Scroll buttons (2) can be used to scroll through all screens. The screens are divided into
register screens, measured data screens, digital input screens (numbered as <d.in>, <d.1>,
...), parameter screens (numbered as <P.1>, <P.2>, ...), and test screens (numbered as
<t.1>,...).
During scrolling, the numbers of the screens appear consecutively. For most screens, the
unit of measurement and the related pictograph are shown together with the screen number.
Scrolling through the screen, the following items can be seen:
Main screen (top right): shows the running hours, whether it's running, and its operation
mode
Going down:
d1 – Shows the service timer reading (hrs or x 1000hrs)
d2 – Shows the dryers running hours
d3 – Shows the actual program version
P1 – Selection between local, remote or LAN
P2 – Setting a node ID for CAN control
P3 – Settings for IP, gateway and subnet mask
P4 – Modifying the service timer
t1 – Tests the display, showing all possible icons
46
Icon Description
When the dryer is stopped, the icon stands still.
When the dryer is running, the icon is rotating.
Network control
Remote control
Is lit when warning is triggered.
Indicates the number of hours the controller has
been powered up
Service required
Indicates the dryer is saving purge
4233 5000 13