Din Rail Controller; Interface Icons And Menu Structure - BeaconMedaes HTM Instruction Book

Dryer Forced Operation
This function forces one dryer to work independent of a dew point or dryer pressure alarm
(disables automatic switchover function).
The switch button is available to enable switchover to the other dryer if preferred.
This function will be disabled automatically after 6h. Afterwards, the dryer will revert to its normal
operation.
4

DIN Rail Controller

4.1

Interface Icons and menu structure

Interface
Item
1
2
3
4
5
6
7
8
9
10
11
12
4233 5000 13
Designation
Escape button
Scroll buttons
Display
Warning LED
Service LED
Operation LED
Voltage LED
Start button
Stop button
Enter button
CAN2 connection
Ethernet port
Function
Go to the previous screen or end current
action.
Use these buttons to scroll through the
menu.
Shows icons and operating conditioning.
Is lit when warning is triggered.
Is lit when a service is needed.
Is lit when the dryer is operational.
Indicates the voltage is turned on.
Start the dryer
Stop the dryer
Confirm action.
Required CAN connection to connect to the
main controller
Port for software download, external
monitoring,...
45