Scan To File; Procedure For Scan To File - Toshiba e-studio 2822AM User Manual

Scan to File

0.
Scan to File allows you to store scans as PDF, TIFF or JPEG files in a network folder. From these folders, you can copy
the saved data and use it on your computer.
If you choose to store your scans in the network folder, the type of operating system, such as Windows or Macintosh,
does not matter; you can save the data in any network folder accessible by FTP or SMB.

Scan to File

 Procedure for Scan to File
 The network administrator has to make settings for storing the scanned data to the client computers. For details,
refer to the TopAccess Guide.
 We recommend that you back up the data stored in the shared folder.
 Delete documents stored in the shared folder when they are no longer needed.
Place the original(s).
1
 For placing the originals, see the pages below.
 P.33 "Copying originals"
 The following originals can be scanned.
- A/B format: A4, A3
- LT format: LT, LD
- K format: 8K
* Reversing Automatic Document Feeder (RADF) only when you load a document on the feeder tray with the original holder open.
 When an original is set on the Reversing Automatic Document Feeder (RADF) for scanning, its size is
automatically detected regardless of the settings specified in "ORIGINAL SIZE".
 When placing a long original (A3, B4, A4-R, LD, LG, COMP, 8K or 16K-R) on the Reversing Automatic Document
Feeder (RADF), open the original holder.
Press [SCAN].
2
140 Scan to File
Network Folder Network Folder Network Folder
* * *
, A5-R, B5, B5-R , B4
* * *
, LT-R , LG , ST-R, COMP
* *
, 16K and 16K-R
Copying files from the
network folder
*
and A4-R
*
Client
computer