2.COPY FUNCTIONS
4
Follow the instructions on the LCD screen to use the "2IN1/4IN1" function. You are instructed to
make the following settings.
ORIGINAL SIZE
Press
or
to select the size of the original.
ORIGINAL ORIENTATION
Press
or
to select the portrait or landscape orientation of the original.
SET ORIGINAL
Place the originals as shown on the LCD screen. Make sure that you place the original in the same orientation
as the one selected in "ORIG. ORIENTATION".
NEXT ORIGINAL?
When you place the original on the original glass, this message appears. Press
PAGE". Select "FINISHED" when you have finished scanning your originals.
When you place the original on the Reversing Automatic Document Feeder, the size of the original selected in
[ORIGINAL SIZE] is disabled as it is detected automatically.
For original sizes not supported by the Reversing Automatic Document Feeder, specify [ORIGINAL SIZE] and
place the original on the original glass.
"CANCEL JOB?" is displayed if there is no operation for a certain period.
or
to select "SCAN NEXT
Copy Settings 51