Toshiba e-studio 2822AM User Manual page 80

3.PRINT FUNCTIONS (Windows)
4. Paper Source
Selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper
size set for each paper source. When you select a paper source, the chosen one is indicated with a green square in
the figure.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Drawer 1 — Paper is fed from the Drawer.
- Bypass Tray — Paper is fed from the Bypass Tray.
The selectable values vary depending on the devices installed in this equipment and their configuration on the
[Configuration] tab.
5. Paper Type
Sets the paper type.
- Plain — Printing on plain paper.
- Thick — Printing on thick paper.
- Thick1 — Printing on thick 1 paper.
- Thick2 — Printing on thick 2 paper.
- Transparency — Printing on transparent sheets.
- Thin — Printing on the back side of thin paper.
 When [Drawer 1] is selected in the [Paper Source] box, only [Plain] can be chosen in the [Paper Type] box.
 When [Envelope] is selected in the [Print Paper Size] box, [Envelope] will be displayed and you cannot change
the paper type.
6. Number of Copies
Sets the number of printed copies. This can be set at between 1 and 999.
7. Orientation
Sets the paper printing direction.
- Portrait — The document is printed in the portrait direction.
- Landscape — The document is printed in the landscape direction.
80 Setting up Print Options