3-1. Preparation
3-1-1. List of Required Equipment and Tools
Required equipment
HD monitor
Oscilloscope
Frequency counter
VISCA cable
BNC cable (5 pcs.)
Separate code cable: D-sub (15-pin) 5 BNC
FPGA write cable: USB BLASTER REV C (USB connection) or BYTE BLASTER II (parallel output) made by Altera
Platform cable: Platform cable USB DLC9G made by Xilinx
Infrared remote controller (Supplied for this unit)
AC adaptor (Supplied for this unit)
75 Z terminator (2 pcs.)
Personal computer: OS: Windows NT/2000/XP, RS-232C interface
Tools
Extension board EX-1089
FCB control software
Fixture cable
System FPGA writing software
Camera FPGA writing software
CPU writing software
BRC-Z700
Section 3
Adjustment
J-6700-580-A
J-6432-770-B
J-6402-620-A
QURTUS II PROGRAMMER 7.2 SP1 or higher made by Altera
iMPACT in Xilinx ISE 8.2 made by Xilinx
Flash Development Toolkit made by Renesas Technology
3-1