Sony BRC-Z700 Service Manual page 45

13. Confirm the settings set as below, then click the [Finish] button.
Protection: Automatic
Messaging: Advanced
The project workspace "BRC-Z700CAMCPU" is created.
n
X.XX means the version of the CPU writing tool.
14. Turn off the power of this unit.
Writing
1. Set the switches on extension board EX-1089 as described below.
S002: OPE
S003: NORMAL
S004: H
S005: H
S006: L
2. Turn on the power of this unit.
3. Start CPU writing software using PC.
4. Open the workspace "BRC-Z700CAMCPU".
5. Select "Device" → "Connect to device" from a menu bar.
Connected to this unit.
6. Select "File" → "Open" from a menu bar.
A file selection screen is displayed.
7. Select a write file.
File name: xxx.mot
8. Select "Device" → "Download xxx.mot" from a menu bar.
Writing operation is started.
9. Select "Device" → "Disconnect" from a menu bar.
Connection with this unit is disconnected.
10. Turn off the power of this unit.
BRC-Z700
S004 S005 S006
H H
L L
S003 S002 S001
WRITE ADJ
NORMAL OPE
H
L
3-15