Sony BRC-Z700 Service Manual page 41

4. Select the directory where new workspace is created in Directory box, and click the [OK] button.
5. Select "H8S/2378F" in Select Device box, then click the [Next] button.
6. Select the COM port of PC in Select port box, then click the [Next] button.
7. Set as below, then click the [Next] button.
Enter the CPU crystal frequency for the selected device:
Enter the clock mode for the selected device:
Select the multiplier for the Main clock frequency (CKM):
Select the multiplier for the Peripheral clock frequency (CKP): (Blank)
8. Confirm the settings set as below, then click the [Next] button.
Select Connection:
Kernel already running: un-check
Recommended Speeds: selected
Use default:
9. Confirm the settings set as below, then click the [Finish] button.
Protection: Automatic
Messaging: Advanced
The project workspace "BRC-Z700VENUSCPU" is created.
n
X.XX means the version of the CPU writing tool.
BRC-Z700
BOOT mode
check-mark
16.5
NONE
2
3-11