Table of Contents
Advertisement
Open re door & depress plunger
Post installation con guration
Skip this step if the device has already been con gured to the
!
system
Ensure the device's ident number has
been noted. The device's ident is located
at the top of the device as shown:
To add devices by ident (post installation);
From Front Display
.
Addr 003
.
'Enter the device type
To Exit
BACK
The device must now be assigned to the system. Refer to the ' Assign Devices'
section on page 6 for details.
©2019 EMS Ltd. All rights reserved.
Add New Device Select Desired RCC 01
Add By Ident
Input Output Device
Open door against bump
stop and depress plunger -
!
check ferrule ts neatly into
recess
01ABC
Add Dev 01ABC Y? 'Enter the Device's ident
Page 10 of 16
Device top view
Set Loop 1
New Addr L1 A003
MK241 Iss 2 20/11/2019 AJM
01ABC
.
Advertisement
Table of Contents
