Table of Contents
Advertisement
Ordering information
Part no
FC-60-2000
FC-60-2010
Pre installation
Installation must conform to applicable local installation codes and
!
should only be installed by a fully trained competent person.
Ensure that the device is installed as per the site survey.
Ensure that the device is tted to the side of the door that shuts against the
door frame.
The supplied ESD protection label must be tted when installing the
Wireless Door Control (WDC) on metal kick plates or uneven surfaces.
DO NOT press the log on button on a pre-programmed device, as this will
cause communication with the control panel to be lost. Should this happen,
delete the device from the system and add it back on.
Before installing the device, ensure that the re door is suitable e.g. self
closing, has a at surface to x to and has appropriate clearance under the
door to accommodate the oor plate.
Any door closing devices used in conjunction with the WDC must conform to
EN 1154.
Components
1
1
FireCell
WDC
©2019 EMS Ltd. All rights reserved.
Product description
FireCell Wireless Door Control (Black)
FireCell Wireless Door Control (White)
2
2
Small & large
oor plates
3
3
Fixing template
(MK255)
Page 3 of 16
4
4
5
Fixings
ESD protection
label
MK241 Iss 2 20/11/2019 AJM
5
Advertisement
Table of Contents
