EMS ZITON RADIO LOOP MODULE Programming Manual
  1. Manuals
  2. Brands
  3. EMS Manuals
  4. Control Unit
  5. ZITON RADIO LOOP MODULE
  6. Programming manual

EMS ZITON RADIO LOOP MODULE Programming Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

ZITON RADIO LOOP MODULE
PROGRAMMING
MANUAL

Advertisement

Table of Contents
loading

Related Manuals for EMS ZITON RADIO LOOP MODULE

Summary of Contents for EMS ZITON RADIO LOOP MODULE

  • Page 1 ZITON RADIO LOOP MODULE PROGRAMMING MANUAL...

  • Page 2: Table Of Contents

    5.5 Viewing the Radio Loop Module Status ..........22 5.6 Radio Channels .................. 23 EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk...

  • Page 3: Introduction

    The Ziton Radio Loop Module is capable of connection to a ZP Protocol Fire Alarm Control Panels Loop via its Loop in and out connection terminals. The Radio Loop Module is addressed on the loop via its onboard 8 way DIP switch.

  • Page 4: Menu Structure

    Menu Options only available when Radio Loop Module does not Second Channel have any devices allocated to it. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk...

  • Page 5: Menu Explanation

    The available fault descriptions are described below; EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk...
  • Page 6 (Slot 6) Detector Manual Call Point Sounder Input/Output EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk Ziton Radio Loop Module Programming Manual (Issue 7d) TSD022...
  • Page 7 Slot 6 Detector Manual Call Point Sounder Input/Output EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk Ziton Radio Loop Module Programming Manual (Issue 7d) TSD022...
  • Page 8 Slot 6 Detector Manual Call Point Sounder Input/Output EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk Ziton Radio Loop Module Programming Manual (Issue 7d) TSD022...
  • Page 9 The batteries must be changed on the device within 7 days for continued reliable operation. This is represented by displaying an empty battery icon. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...
  • Page 10 Shown indicates Caution Signal Level Shown indicates Caution Signal Level Shown indicates No Signal Level Received EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk...
  • Page 11 Output Test – This menu allows you to turn device LED’s on. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...

  • Page 12: Add New Device

    Log On Button Sounder Log On Button EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk Ziton Radio Loop Module Programming Manual (Issue 7d) TSD022...

  • Page 13: Remove Device

    Module Background Level – this menu when entered shows the background radio signal level on the two signalling channels used by the Ziton Radio Loop Module. The available background level descriptions are described below; Ch 1 – this indicates the background level at the Radio Loop Module on the first frequency channel used by the system.

  • Page 14: Radio Channels

    Legacy Mode – To ensure correct operation of devices reporting to the Control Panel, Legacy Mode must be correctly selected. Legacy Mode ‘ON’ is to be selected when the Ziton Radio Loop Module is connected to a ZP3 Panel. Legacy Mode ‘OFF’ is to be selected when the Ziton Radio Loop Module is connected to a ZP2 (2010) Panel.

  • Page 15: Viewing The Device Status

    • Press the rotary control and the display will change to show the devices allocated onto the Ziton Radio Loop Module and their current status. The list can be viewed by turning the rotary control. The information is shown in the following format;...
  • Page 16 • The menu will timeout after 30 seconds or alternatively press the Back button to immediately return to the previous Menu. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...
  • Page 17 To enter the Signal Level Menu press the rotary control with the Signal Level text displayed. The display will change to show the last Signal Level for the two channels used. The received signal strength at the Ziton Radio Loop Module from the device is shown as an LI Dev level, therefore indicating the signal that has been sent from the device to the Radio Loop Module.
  • Page 18 This will indicate the signal levels seen. If 00 is shown then a signal has not been seen from the device in question on that particular channel as yet. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...

  • Page 19: Output Test

    NOTE: If this step is not performed, the output will time out after 30 seconds and the LED will thus switch off EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...

  • Page 20: Adding New Devices To The System

    Press the rotary control and the display will change to show; Press Dev Log On Note: If 31 devices are already allocated to the Ziton Radio Loop Module, the display will show ‘Dev Table Full’ instead of the above screen.

  • Page 21: Removing Device From The System

    The menu will timeout after 30 seconds or alternatively press the Back button to immediately return to the previous Menu. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...

  • Page 22: Viewing The Radio Loop Module Status

    Ident xxxxx Software Vxx.xx Serial Data Note: The Serial Data option is only available when the Ziton Radio Loop Module has switch 8 on. This enables Serial Data to be seen on a terminal programme via the onboard serial port. If either of these options are selected it is important NOT to leave the Radio Loop Module in this diagnostic / operational mode.

  • Page 23: Radio Channels

    The menu will timeout after 30 seconds or alternatively press the Back button to immediately return to the previous Menu. Note: The Serial Data option is only available when the Ziton Radio Loop Module has switch 8 on. This enables Serial Data to be seen on a terminal programme via the onboard serial port.
  • Page 24 If the results are required to be viewed turn the rotary control until the display shows, View Results Y? EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk Website: www.emsgroup.co.uk...
  • Page 25 The menu will timeout after 30 seconds or alternatively press the Back button to immediately return to the previous Menu. EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England Tel: +44 (0) 1227 369570 Fax: +44 (0) 1227 369679 Email: enquiries@emsgroup.co.uk...
  • Page 26 Sea Street Herne Bay, The information contained within this literature is Kent CT6 8JZ correct at time of publishing. The EMS Group reserves England the right to change any information regarding products as part of its continual development Tel: +44 (0) 8712 710804 enhancing new technology and reliability.

Table of Contents