Connection Connector/Cable; Removing/Reinstalling The Exterior Parts; Removing/Reinstalling The Top Cover - Sony WLL-RX55 Maintenance Manual

1-3. Connection Connector/Cable

Connection made with the connector panels during instal-
lation or service, should made with the connectors or
complete cable assemblies specified in the following list,
or equivalent parts.
Connector Name
DC-IN
DC-OUT
IF-1/2 INPUT
IF-1/2 OUTPUT
STREAM 1/2 IN
IF-1/2 STREAM OUT
REFERENCE
SDI/ASI-1/2/3 OUTPUT
VIDEO-1/2/3 OUTPUT
PIX OUTPUT
WF OUTPUT
AUDIO OUTPUT CH-1/2
CAMERA CONTROL
(3P, MALE)
MIC REMOTE
(15P, FEMALE)
INTERCOM/TALLY/PGM
(25P, FEMALE)
WF MODE
(4P, FEMALE)
REMOTE
(8P, FEMALE)
INTERCOM
(5P, FEMALE)
*: The IF cable can be extended to any length short of which cable
transmission loss becomes 10 dB (ex. about 100 m when using Belden
9913).
WLL-RX55
Connection Connector/Cable
1-508-362-00 XLR, 4P Female
1-566-425-11 ROUND TYPE,
4P Male
1-827-203-11 Coaxial cable IF-1/
with N-type connectors (10 m :
supplied with the unit) or
equivalent *
1-564-742-11 PLUG, BNC or
Coaxial cable BELDEN 8281 or
equivalent
1-508-083-00 XLR, 3P Female or
CANNON XLR-3-11C or the
equivalent
1-506-582-11 D-Sub,15P Male,
or JAE DA-15PF-N or the
equivalent
D-Sub, 25P Male, JAE DA-
25PF-N or the equivalent
1-506-155-00 plug, 4P Male
(supplied)
1-766-848-11 plug, 8P Male, or
CCA cable assembly (optional)
CCA-5-30 (30 m)
CCA-5-10 (10 m)
CCA-5-3 (3 m)
1-508-370-11 XLR, 5P Male, or
CANNON XLR-5-12C or the
equivalent
1-4. Removing/Reinstalling the Exterior
Parts

1-4-1. Removing/Reinstalling the Top Cover

1. Loosen the two screws with stopper and open the front
panel in the arrow direction.
Front panel
Screw with stopper
Screw with stopper
2. Remove the eight screws.
B3 x 6
B3 x 6
B3 x 6
1-5 (E)