Table of Contents
Advertisement
ANTENNA/CABLE CONNECTION
TO CONNECT FM ANTENNA
To get the optimum.sound of FM broadcasts, install a
suitable outdoor FM antenna.
The supplied ribbon antenna may be useful until you install a
more suitable antenna.
Ribbon antenna supplied (or 300-ohm twinlead)
connection
;
[ nee |
3002752
AM
FM
Connect the ribbon antenna or twinlead to the supplied
external antenna connector and connect it to the FM ANT-B
connector.
ana
=
1)
External antenna connector
(supplied)
Fully extend the antenna and fasten the ends to a wall using
thumbtacks or adhesive tape.
75-ohm coaxial cable connection
STR-AV550
FM . abr
3002752
AM
3) Remove the ring.
(Keep It in the projection on the lid.)
4) Loosen the screw and
insert the cable.
@ Strip the cable.
Seng to =
8
@ Snap the cover into place.
Note
The supplied ribbon antenna or a standard 300-ohm twinlead is
susceptible to the pickup of extraneous nolse.
Note on FM tuner connection (STR-AV650 only)
If you have another FM tuner, connect an FM extemal antenna
to the CATV ANT-A IN connector and connect the CATV ANT-A
OUT connector to the FM antenna terminal of the other FM
tuner.
18
Notes on the FM and TV antennas
— When the stereo receiver and video system are connected and
both are In use
We recommend the use of outdoor antennas to obtaln better
quality picture and sound.
* Use the outdoor FM antenna for FM reception and the TV
antenna for TV reception. Do not use one antenna for both.
» Usa 75-ohm coaxial cables for both antennas.
* Locate the two antennas as distant as possible from each other.
If FM signals interfere with the TV picture and sound, press any
FUNCTION button to change the function mode from the tuner to
another.
Advertisement
Table of Contents
