Dynamic Ip (Dhcp); Pppoe - D-Link DWR-116 User Manual

Section 3 - Configuration

Dynamic IP (DHCP)

This section will help you to obtain IP address information
automatically from your ISP. Use this option if your ISP didn't
provide you with IP address information and/or a username and
password.
Host Name:
(Optional) Required by some ISPs.
Primary DNS (Optional) Fill in with IP address of primary
Server: DNS server.
Secondary DNS (Optional) Fill in with IP address of secondary
Server: DNS server.
MTU (Maximum You may need to change the Maximum
Transmission Transmission Unit (MTU) for optimal
Unit):
performance. The default value is 1500.
MAC Address: The default MAC address is set to the Internet
port's physical interface MAC address on the
broadband router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
button to replace the Internet port's MAC
address with the MAC address of your PC.
Auto-reconnect:
This feature enables this product to renew
WAN IP address automatically when the lease
time is expiring.
Click Save Settings to save your changes,
or click Don't Save Settings to discard your
changes.
D-Link DWR-116 User Manual
Section 3 - Configuration
Choose this Internet connection if your ISP provides you with a
PPPoE account.
Username: The username/account name that your ISP
provides to you for PPPoE dial-up.
Password: Password that your ISP provides to you for
PPPoE dial-up.
Verify Password: Fill in with the same password in Password field.
Service Name: (Optional) Fill in if provided by your ISP.
IP Address: (Optional) Fill in if provided by your ISP. If not, keep the default value.
Primary DNS Server: (Optional) Fill in if provided by your ISP. If not, keep the default value.
Secondary DNS (Optional) Fill in if provided by your ISP. If not, keep the default value.
Server:
MAC Address: MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing the Clone button.
The Restore MAC button will reset the router to its default MAC address.
Maximum Idle Time: The amount of time of inactivity before disconnecting established PPPoE session. Setting it to zero or enabling Reconnect
Mode: Always-on setting will disable this feature.
Maximum You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default setting of PPPoE is 1492.
Transmission Unit
(MTU):
Auto-reconnect: The device will dial-up PPPoE connection automatically.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
17 D-Link DWR-116 User Manual

PPPoE

18