Continental Fireplaces Builder Series Installation Manual page 32

rough framing
EN
note:
For heavier fi nishing materials such as marble, we recommend adding extra support to the frame. Ensure
there is adequate fl oor support for the appliance and fi nishing material.
Before framing your appliance, determine vent requirements before deciding the fi nal location of the appliance.
After rough framing, place the appliance in its fi nal position.
f i r e - p a r t s . c o m
* Based on 1/2" fi nishing material thickness.
32
W415-1850 / A / 03.06.19
A
Ref. Minimum rough framing dimensions
A
B
B
16"* (40.6cm)
35 1/2" (90.2cm)