Introduction; Installation And Configuration - Aastra Venture IP Options Manual

Web administration system ventureip load version 2.15.0

Hide thumbs Also See for Venture IP:

Table of Contents

Venture IP Web Administration System Options Guide

Introduction

This guide provides instructions for using a web browser to administer all VentureIP 480i telephones

operating on the same network. While administering the VentureIP telephone system does not require

the technical expertise of a traditional "system administrator" or IT professional, it is recommended that

one person controls the advanced feature settings contained in this guide.

A typical Venture IP system configuration is as follows:

480480

480

A typical configuration consists of a standard IP Router or Switch (not included), Cat5 cabling to each

phone, and a Venture IP Gateway for access to standard analog phone lines provided by a Public

Network Service Provider. No Central Server is required. All the features are in the Phone.

System hookup is easy with the Venture IP System. Simply plug each phone and the Venture IP

Gateway into an unused port of a Fast Ethernet 100Mbps Router or Switch, connect the Venture IP

Gateway (provided separately) to the analog phone lines provided by your service provider, apply

power, and the system auto configures itself. Note that the example above assumes a Router or Switch

equipped with POE (Power Over Ethernet) to supply power to the Venture IP Gateway and phones.

Mid-span POE injectors are also an option and can be ordered separately from Aastra.

PAGE 1

8/4/2006

Table of Contents

Ventureip 480i