Comfort Auto Variants - Grundfos COMFORT 10-16 Temperature control Installation And Operating Instructions Manual

5.1 COMFORT Auto variants

Pos. Description
AUTO
1
100 % LED. When lit, the pump runs according to continuous 100
2
% mode.
Sensor defect alarm. Lights up in red color if the internal or
3
external temperature sensor is defect.
4 Arrow button for changing mode.
Temperature control mode. It lights up when the pump is running
5
in temperature control mode.
To change the control mode on the pump, press the button on the operating
panel. Press the button more times to change between the three available
control modes:
• AUTO
ADAPT
This mode adapts the operating hours by switching on and off according to
the tapping pattern of the users as detected by the sensors attached to the
hot-water outlet.
• 100 % mode
The pump is running continuously at full speed.
14
5
. It lights up when the pump is running in AUTO
ADAPT
1
2
3
4
.
ADAPT