English (GB) Installation and operating instructions 1. Symbols used in this document Original installation and operating instructions These installation and operating instructions describe Grundfos Conlift. 1.1 Warnings against hazards involving risk of death or personal injury Sections 1-4 give the information necessary to be able to unpack, install and start up the product in a safe way.
1.2 Other important notes 3.2 Electrical installation A blue or grey circle with a white graphical Electrical connection must be carried out symbol indicates that an action must be by an authorized electrician. taken. Carry out the electrical connection according to local A red or grey circle with a diagonal bar, regulations.
4. Starting up the product 3.2.1 Cable to condensate source or external alarm The Conlift has a safety overflow switch which can Start up Conlift in accordance with local be connected to the condensate source or to an regulations and accepted codes of good external alarm system.
5.4 Handling of condensates 5.1 Product description If Conlift is to be connected to a pressure-reducing valve, observe the Grundfos Conlift1 LS is a small, compact lifting boiler manufacturer's instructions. station with built-in-non-return valve. 5.2 Intended use When cleaning heat exchangers and...
7. Servicing the product 5.6 Accessories The following accessories are available from your Always use original accessories from Grundfos to local Grundfos supplier. ensure safe and reliable operation. WARNING Accessory/ Product Description service part number Electric shock Death or serious personal injury...
The product will be classified as contaminated if it has been used for a liquid which is injurious to health or toxic. If you request Grundfos to service the product, contact Grundfos with details about the liquid before returning the product for service. Otherwise, Grundfos can refuse to accept the product for service.
The power supply cable is Repair or replace the cable. This must only damaged. be carried out by an authorised service workshop or by Grundfos. The thermal overload switch has tripped: – The motor is not sufficiently Clean the cooling slots in the motor cover.
1. Use the public or private waste collection service. See the nameplate. 2. If this is not possible, contact the nearest Input power Grundfos company or service workshop. P1 = 70 W. Input current I = 0.65 A. Alarm connection An external alarm can be connected via the safety overflow switch.
Page 12
Argentina China Hong Kong Bombas GRUNDFOS de Argentina S.A. GRUNDFOS Pumps (Shanghai) Co. Ltd. GRUNDFOS Pumps (Hong Kong) Ltd. Ruta Panamericana km. 37.500 Centro 10F The Hub, No. 33 Suhong Road Unit 1, Ground floor Industrial Garin Minhang District Siu Wai Industrial Centre 1619 Garín Pcia.
Page 13
Malaysia Serbia Turkey GRUNDFOS Pumps Sdn. Bhd. Grundfos Srbija d.o.o. GRUNDFOS POMPA San. ve Tic. Ltd. 7 Jalan Peguam U1/25 Omladinskih brigada 90b Sti. Glenmarie Industrial Park 11070 Novi Beograd Gebze Organize Sanayi Bölgesi 40150 Shah Alam Phone: +381 11 2258 740...
Need help?
Do you have a question about the Conlift1 LS and is the answer not in the manual?
Questions and answers