Service Menu - Brink Renovent Sky 150 Installation Instructions Manual

6.5.1 Service menu

From the main menu, rotate the right-hand setting up to select
the
SERVICE MENU
right-hand setting knob.
In the service menu, you can select from three underlying
menus, including:
- Filter reset (Filter Reset)
- Reset fault codes (Reset fault)
- Overview fault codes (Overv. fault)
Filter reset (Filter Reset)
A
for all appliances connected to the control unit.
Reset fault codes (Reset fault)
B
Activating reset fault codes will delete the fault codes list
for every individual connected appliance.
If only 1 appliance is connected, then that one is the master
appliance; no more appliances are shown in this list than
are detected through the e eBus connection.
Overview fault codes (Overv. fault)
C
Overview fault codes shows the fault codes for every
appliance (E-code); an explanation of fault codes is shown
in §7.2.
If only 1 appliance is connected, then that one is the master
appliance; no more appliances are shown in this list than
are detected through the e eBus connection.
Chapter 6 Display
MAIN MENU
A
B
C
Renovent Sky 150
SERVICE MENU
19