Safety Information - JDS Uniphase CleanBlast FCL-P1005 User Manual

safetY InforMatIon

CLEANINg SOLvENT SAFETY
Important
Given the variety of factors that can affect the use and application of this product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate this product to determine whether
it is fit for a particular purpose and suitable for user's method of use or application.
hFE-based Cleaning Fluid
Intended use: For industrial use only. Not intended for use as a medical device or drug.
Specific use
Cleaning solvent for use in JDSU's CleanBlast systems.
Caution
Do not substitute any other cleaning solution.
Warning
Store away from heat, out of direct sunlight, away from oxidizing agents, and away from strong bases. Keep
container tightly closed and in a well ventilated area. Contents may be under pressure if stored/shipped under
elevated temperature. Open closure slowly to vent pressure.
Contact 3M® for the most current safety information and MSDS. Reference 3M part number HFE-72DA.
First Aid Instructions
The following first aid recommendations are based on an assumption that appropriate personal and
industrial hygiene practices are followed:
Eye Contact: Flush eyes with large amounts of water. If adverse signs/symptoms persist, get medical
attention.
Skin Contact: Immediately flush skin with large amounts of water. If adverse signs/symptoms persist, get
medical attention. Remove contaminated clothing and shoes and wash before reuse.
Inhalation: Move to area with fresh circulating air. If adverse signs/symptoms persist, get medical
attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Drink 2 glasses
of water. Never give anything by mouth to an unconscious person. If adverse signs/symptoms persist, get
medical attention.
CleanBlast – PortaBle
23