Inch Lcd - JDS Uniphase CleanBlast FCL-P1005 User Manual

6.4-InCh tft lCD
6.4-INCh DISPLAY
6.4-INCh LCD SPECIFICATIONS
Dimensions 17.3 x 13.5 x 2.8 cm (6.8 x 5.3 x 1.1 in)
Display method Active matrix TFT - LCD
Display size 6.4-in diagonal
Color system NTSC/PAL (auto switchable)
resolution 960 x 234
operating temp
–10°C (14°F) ~ +60°C (140°F)
storage temp
–20°C (–4°F) ~ +70°C (158°F)
10
Power Button
Press this button to power ON and OFF.
To power OFF, press and hold for 1 to 2 seconds.
mode Button
Press this button to switch and select
Brightness, Contrast, Color, Tint, and reset
modes.
up/Down Selector
Press the Mode Button to select mode, then
press this button to adjust level of image
quality, e.g., brighter or darker screen, high or
low contrast.
Power Cable
The terminal for power and video signal
between the LCD and probe microscope. The
S-video input is located on the CleanBlast
panel.
Note: If the optional 6.4-in LCD is purchased with the
CleanBlast system, the display will be pre-installed and
will require no installation. If you would like to purchase
the LCD, please refer to the Parts section (page 25) of
this manual to order this part. Installation instructions
for the LCD will accompany the display when ordered
separately.
User ManUal