Optional Configurations - JDS Uniphase CleanBlast FCL-P1005 User Manual

oPtIonal ConfIGUratIons

90° hANDSET
The 90-degree handset is an optional configuration
that is particularly useful for cleaning termini inside
Mil-Aero type connectors mounted in hard-to-reach
locations. Similar to the standard handset, it features
a safety release button that prevents accidental
discharge of solvent or cleaning cycle.
CLEANINg mIL-AERO TERmINI
To clean the PIN termini:
1.
I
nsert the tip over the termini.
2.
Pull the safety trigger to depress the
safety release button.
3.
Press the run button to initiate cleaning cycle.
To clean the SOCKET side:
1.
Seat the tip over one of
the sockets.
2.
Pull the safety trigger to depress the
safety release button.
3.
Apply slight pressure and push the handset
into the insert until it stops (the nozzle shroud
will retract and the cleaning nozzle inside the
tip will advance inside the socket).
4.
Press the run button to initiate cleaning cycle.
BACKPLANE WAND
The backplane wand (FCL-MBH) is an optional
configuration (only available with FCL-P6100 and
FCL-P6102) that is specifically designed to clean
connectors located behind the backplane.
CleanBlast – PortaBle
Nozzle shroud
safety Trigger
safety release Button
run Button
2
run Button
Backplane wand
FCLT-mIL2-r
Cleaning Tip
3
Cleaning Tip
11